Cement Stocks List
|2019-09-13||AHCHY||Narrow Range Bar||Range Contraction|
|2019-09-13||AHCHY||Upper Bollinger Band Walk||Strength|
|2019-09-13||ASCK||Narrow Range Bar||Range Contraction|
|2019-09-13||ASCK||Pocket Pivot||Bullish Swing Setup|
|2019-09-13||CBUMY||Narrow Range Bar||Range Contraction|
|2019-09-13||HCMLF||Crossed Above 50 DMA||Bullish|
|2019-09-13||HCMLF||Crossed Above 200 DMA||Bullish|
|2019-09-13||HCMLF||Narrow Range Bar||Range Contraction|
|2019-09-13||HCMLF||Stochastic Reached Overbought||Strength|
|2019-09-13||HCMLF||Calm After Storm||Range Contraction|
|2019-09-13||HCMLY||Narrow Range Bar||Range Contraction|
|2019-09-13||HCMLY||Upper Bollinger Band Walk||Strength|
|2019-09-13||HDELY||Narrow Range Bar||Range Contraction|
|2019-09-13||HDELY||Upper Bollinger Band Walk||Strength|
|2019-09-13||PSGTY||Crossed Above 20 DMA||Bullish|
|2019-09-13||PSGTY||Crossed Above 50 DMA||Bullish|
|2019-09-13||PSGTY||Narrow Range Bar||Range Contraction|
|2019-09-13||SRCH||Crossed Above 50 DMA||Bullish|
|2019-09-13||SRCH||Narrow Range Bar||Range Contraction|
|2019-09-13||THYCY||Crossed Above 20 DMA||Bullish|
|2019-09-13||THYCY||Narrow Range Bar||Range Contraction|
A cement is a binder, a substance used for construction that sets, hardens, and adheres to other materials to bind them together. Cement is seldom used on its own, but rather to bind sand and gravel (aggregate) together. Cement mixed with fine aggregate produces mortar for masonry, or with sand and gravel, produces concrete. Cement is the most widely used material in existence and is only behind water as the planet's most-consumed resource.Cements used in construction are usually inorganic, often lime or calcium silicate based, and can be characterized as either hydraulic or non-hydraulic, depending on the ability of the cement to set in the presence of water (see hydraulic and non-hydraulic lime plaster).
Non-hydraulic cement does not set in wet conditions or under water. Rather, it sets as it dries and reacts with carbon dioxide in the air. It is resistant to attack by chemicals after setting.
Hydraulic cements (e.g., Portland cement) set and become adhesive due to a chemical reaction between the dry ingredients and water. The chemical reaction results in mineral hydrates that are not very water-soluble and so are quite durable in water and safe from chemical attack. This allows setting in wet conditions or under water and further protects the hardened material from chemical attack. The chemical process for hydraulic cement found by ancient Romans used volcanic ash (pozzolana) with added lime (calcium oxide).
The word "cement" can be traced back to the Roman term opus caementicium, used to describe masonry resembling modern concrete that was made from crushed rock with burnt lime as binder. The volcanic ash and pulverized brick supplements that were added to the burnt lime, to obtain a hydraulic binder, were later referred to as cementum, cimentum, cäment, and cement. In modern times, organic polymers are sometimes used as cements in concrete.